Part No.:MD-2A02
Clean work clothes split clothes (front zipper), clothes and pants split, hooded top, front zipper, split pants, waist elastic and drawstring adjustment, cuffs, and feet elastic design, clean work clothes with cross elastic design at the back of the cap, The design of the face is subtle and tight, and the cleaning method is basically the same as that of general clothing, but it must be neutral, strong detergency, and easy to rinse.
MIDPOSI MD-2A02 Split-Type Cleanroom Workwear is designed for Grade C and Grade D cleanroom support areas where operators need clean, comfortable and easy-to-change workwear for daily controlled-environment operations. Unlike one-piece sterile coveralls used in higher-control zones, this model uses a separated jacket-and-pants structure to improve dressing convenience, movement comfort and garment management efficiency.
The set includes a hooded front-zipper top and split pants. The jacket features elastic cuffs and a hood with cross-elastic design at the back. The pants include waist elastic and drawstring adjustment, with elastic foot openings to improve fit and reduce loose edges during cleanroom movement.
MD-2A02 is not positioned as a high-grade sterile coverall for Grade A/B aseptic processing. It is a practical split-type cleanroom workwear set for Grade C and Grade D environments where comfort, easy changing, daily washing and cost-effective garment rotation are more important.
This makes it suitable for cleanroom support areas, controlled production workshops, packing zones, inspection rooms and general clean work areas where operators need clean clothing with a smooth surface, low particle release, anti-static function and convenient wearability.
The MD-2A02 split-type cleanroom workwear set is designed for practical cleanroom operations where operators need convenient dressing, reliable fit and controlled garment coverage.
| Design Item | Description | Practical Benefit |
|---|---|---|
| Garment Type | Split-type cleanroom workwear with separate clothes and pants. | More convenient to wear, remove and replace than one-piece garments. |
| Top Structure | Hooded top with front zipper. | Supports head coverage and fast front-entry dressing. |
| Hood Design | Cross elastic design at the back of the cap. | Improves fit and helps keep the hood stable during movement. |
| Face Opening | Subtle and tight face design. | Helps improve facial fit while maintaining operator comfort. |
| Cuffs | Elastic cuff design. | Reduces loose sleeve openings and improves daily cleanroom wearability. |
| Pants | Split pants with waist elastic and drawstring adjustment. | Allows easier size adjustment for different operators. |
| Foot Opening | Elastic design at the feet. | Improves lower-leg fit and reduces garment looseness around cleanroom shoes. |
For Grade C and Grade D areas, cleanroom workwear should balance contamination-control performance with comfort, easy changing and efficient daily garment management.
The fabric surface is designed to be smooth, reducing dust attachment and improving handling.
Helps reduce static-related dust attraction in controlled cleanroom support areas.
Designed not to shed fibers and particles during normal cleanroom work.
Helps reduce dust absorption and contamination transfer during movement.
The split structure makes dressing and garment replacement faster and more convenient.
Elastic and drawstring adjustment improve fit for routine cleanroom work shifts.
MD-2A02 is recommended for cleanroom users who need split-type clean work clothes for Grade C and Grade D environments. It is especially suitable where operators need frequent entry and exit, flexible movement and convenient garment changing.
The cleaning method for cleanroom work clothes is similar to general clothing in basic process, but the water quality, detergent selection, rinsing method and drying environment must be controlled. Neutral detergent with strong detergency and easy rinsing is recommended.
| Cleaning Method | Process Description | Recommended Control Point |
|---|---|---|
| Ordinary Washing | Use tap water filtered by 0.3μm filtration precision and clean using an industrial washing machine. | Use neutral detergent, strong detergency and easy-rinse formula. Dry in a Grade 7 / 10,000-level clean environment. |
| Ordinary Washing + Pure Water Rinsing | The basic washing process is similar to ordinary washing, but pure water is used during the rinsing stage. | Helps reduce residue after washing. Dry in a Grade 7 / 10,000-level clean environment. |
| Solvent Cleaning | For certain pollutants, first perform ordinary wet washing, then use a distilled solvent cleaning process where applicable. | After drying, sort and fold garments in a cleanroom, then pack in clean polyethylene or nylon bags. |
Suggested washing temperatures: polyester clothing 60–70°C, nylon fabric 50–55°C, with high-temperature processing around 60°C where suitable. Final parameters should follow the garment fabric, customer SOP and cleanroom laundry validation.
After drying, clean work clothes should be sorted and folded in a cleanroom laundry environment and packed in clean polyvinyl or nylon bags. Double packaging is usually recommended for better cleanroom transfer control.
This model should be selected when practical daily use is more important than maximum sterile-area coverage.
| Selection Point | MD-2A02 Split-Type Workwear | One-Piece Sterile Coverall |
|---|---|---|
| Best Use Area | Grade C/D support areas and general clean areas. | Higher-control sterile or aseptic cleanroom areas. |
| Wearing Convenience | Easier to wear, remove and replace due to split structure. | More restrictive but offers stronger full-body coverage. |
| Size Management | Jacket and pants sizing can be managed more flexibly. | One-piece sizing must fit body length and overall proportions. |
| Operator Comfort | Better for frequent movement and routine cleanroom shifts. | Better for stricter gowning discipline in higher-grade areas. |
| Cost Efficiency | Suitable for bulk workwear programs in support areas. | Typically higher specification and higher management cost. |
Share your cleanroom grade, application area, size range, color requirement and order quantity. MIDPOSI can recommend a suitable split-type cleanroom workwear configuration for your Grade C/D support areas or controlled production zones.
MD-2A02 is best used for Grade C and Grade D cleanroom support areas where operators need split-type clean work clothes that are easy to wear, comfortable and suitable for daily cleanroom operations.
This model uses a separated jacket-and-pants structure, making it easier to wear, remove and size-manage. It is more suitable for Grade C/D support areas rather than high-grade aseptic core zones.
The jacket includes a hooded top, front zipper, elastic cuffs, a subtle tight face design and cross elastic design at the back of the cap.
Cleanroom work clothes should be washed using controlled methods such as filtered water washing, pure water rinsing or solvent cleaning where applicable. They should be dried in a Grade 7 / 10,000-level clean environment and packed in clean bags.
A neutral detergent with strong detergency and easy rinsing is recommended. The final cleaning process should follow the garment material and the facility’s cleanroom laundry SOP.
We will contact you within 1 working day, please pay attention to the email with the suffix “*@midposi.com”.
