MIDPOSI MD-09J01 Autoclavable Cleanroom Hood is designed to help reduce particle and microbial contamination from the head, hair, ears and neck area in sterile and controlled cleanroom environments. Made from reusable, washable and low-lint cleanroom fabric, it is available with 5mm stripe or 5mm grid conductive fiber options for anti-static performance.
MIDPOSI MD-09J01 Autoclavable Cleanroom Hood is designed to help reduce particle and microbial contamination released from the head, hair, ears and neck area. It is suitable for pharmaceutical cleanrooms, sterile areas, laboratories, electronics manufacturing and other controlled environments where personnel-borne contamination must be managed.
Made from reusable, washable and low-lint cleanroom fabric, this hood can be integrated with cleanroom coveralls, masks, goggles, gloves and boots to build a complete gowning system. Conductive fiber options include 5mm stripe and 5mm grid structures for anti-static performance.
In cleanrooms, the head area is one of the most important contamination-control points. Hair, skin flakes, facial particles and garment fibers can enter the controlled environment if the hood does not provide proper coverage.
MD-09J01 is designed as a reusable cleanroom hood for B2B cleanroom users who need a practical balance of contamination control, wearer comfort, anti-static performance and repeated processing capability.
For cleanroom procurement teams, a cleanroom hood should be evaluated not only by appearance but also by coverage, fabric performance, gowning compatibility and processing requirements.
Helps cover hair, ears and neck areas that may release particles into controlled environments.
Designed for cleanroom laundering and repeated use in garment management programs.
Can support sterile-area workflows where autoclavable garment options are required.
Controlled fabric construction helps reduce lint, fibers and particle shedding.
Available with 5mm stripe or 5mm grid conductive fiber options for ESD-sensitive cleanrooms.
Designed for daily cleanroom gowning routines and long working hours.
MIDPOSI cleanroom hoods can be made with low-lint cleanroom fabric and conductive fiber structures according to the customer’s cleanroom classification, anti-static requirement and garment SOP.
| Option | Conductive Fiber Structure | Typical Benefit | Recommended Use |
|---|---|---|---|
| A1301 | 5mm Stripe | Anti-static baseline with cleanroom garment compatibility. | General controlled areas and routine cleanroom hood programs. |
| A1301 | 5mm Grid | More uniform conductive fiber distribution. | Facilities requiring stronger ESD control and more stable anti-static performance. |
Selection guidance: choose 5mm stripe or 5mm grid fabric according to your cleanroom grade, ESD policy, sterilization method and garment management SOP.
MD-09J01 is suitable for sterile and controlled environments where head and neck coverage is required as part of a complete cleanroom gowning system.
A cleanroom garment system is incomplete if the head and neck area is not properly controlled. Even when operators wear coveralls, uncovered hair, ears or neck areas may still release particles into the room.
| Risk Area | Potential Contamination Source | How the Hood Helps |
|---|---|---|
| Hair | Hair and scalp particles may be released during movement. | Provides head coverage to help reduce particle dispersion. |
| Ears and Side Face | Skin flakes and particles may escape from uncovered side areas. | Improves side coverage when used with masks and goggles. |
| Neck Area | Neck movement can release skin particles and fibers. | Helps cover the neck interface between hood and coverall. |
| Static Electricity | Static can attract dust and particles to garments. | Conductive fiber options help support anti-static performance. |
The selection between reusable autoclavable hoods and disposable hoods depends on cleanroom grade, sterilization workflow, user frequency, waste-control policy and total cost of ownership.
| Comparison Point | Autoclavable Cleanroom Hood | Disposable Cleanroom Hood |
|---|---|---|
| Use Model | Reusable after controlled washing and sterilization. | Single-use or limited-use depending on SOP. |
| Cost Logic | Better for repeated use and long-term garment programs. | Better for visitors, short-term use or low-volume operations. |
| Waste Generation | Lower disposable waste volume. | Higher waste volume after each use. |
| Processing Requirement | Requires validated laundry and sterilization workflow. | Requires inventory and disposal management. |
| Best Use Case | Regular cleanroom operators and sterile-area garment programs. | Visitors, temporary staff and low-frequency cleanroom access. |
Share your cleanroom grade, application area, sterilization process, conductive fiber preference, size requirement and order quantity. MIDPOSI can recommend a suitable MD-09J01 cleanroom hood configuration for your facility.
It is used to help reduce particle and microbial contamination released from the head, hair, ears and neck area in sterile and controlled cleanroom environments.
Yes. The hood is designed as reusable and washable cleanroom apparel. Autoclavable options are available where sterilization workflows are required.
The available conductive fiber options include 5mm stripe and 5mm grid structures. Selection depends on the customer’s anti-static requirement and cleanroom SOP.
Cleanroom hoods are commonly used together with coveralls, masks, goggles, gloves, boots, shoe covers and garment bags.
They are commonly used in pharmaceutical manufacturing, biotech laboratories, medical device production, electronics cleanrooms, sterile areas and controlled production environments.
We will contact you within 1 working day, please pay attention to the email with the suffix “*@midposi.com”.
